Release history

What’s New

Firmware releases for the EXACTUS® HELIOS, newest first. Download files on the Downloads page.

Version 0.24.0

Version 0.24.0 lets you set up a measurement by scanning a QR code, and lets you set how bright the camera image is.

New features

  • Set up a measurement from a QR code. Point the Measure screen at a location QR code and a green box appears around it, with a card showing the location, emissivity and measurement mode the code carries. Tap inside the green box to set all three in one step for your next measurement; a green tick confirms it. Tap anywhere else to ignore the code. Pulling the trigger always comes first: the box and the card disappear and the reading starts as usual. If the card shows “Not applied”, check the Measure screen before you measure. If the new location and emissivity are showing, open the Emissivity screen and tap Save, because the pyrometer may still be using its previous emissivity.
  • Scanned locations join your list. A location you set from a QR code is added to your location list, so you can pick it again later without scanning or editing locations.csv. Scanning the same code again does not add it twice.
  • Set the image brightness. A new Exposure screen in Settings has an Image brightness slider, from 3 stops darker to 2 stops brighter, with the factory setting marked and a Reset button. Tap Save to apply it; the setting is kept after a restart. If the camera does not accept the new setting, Save shows “Not applied” and your previous setting stays.

Version 0.23.0

Version 0.23.0 is a small release. It completes the set of key images you can review on the device.

New features

  • See the average image on the device. Open a saved measurement and scroll down to review all five key images — hottest, coldest, average, first, and last — each with the temperature it was taken at. Measurements saved with version 0.21.0 or later show it; earlier ones do not have the images.

Version 0.22.0

Version 0.22.0 is a small release. Two changes affect the files you take off the device.

New features

  • The drive is called HELIOS. A memory card formatted on the device now appears on your computer as a drive named HELIOS, so you can tell it apart from other drives. A card the device has not formatted keeps the name it already had.
  • Saved data follows your unit setting. The data file saved with each measurement now records temperatures in the unit set on the device, the same as Records.csv already did. Files saved by an earlier version keep the unit they were written with, so check the unit before comparing old and new files on a PC.

Version 0.21.0

Version 0.21.0 is the biggest Helios update yet. It brings new ways to aim, new ways to organize and save your measurements, and — for the first time — seven on-device languages.

New features

  • Work in your language. Helios now speaks seven languages — English, Chinese, German, Spanish, French, Portuguese, and Italian. Choose yours in Settings.
  • Tag every measurement with a location. Build your own list of locations and sublocations in a simple text file on the SD card, then label each reading as you take it. Helios creates a starter file for you and picks up your edits the moment you unplug from USB.
  • Choose how you aim. Switch the aiming mark between Standard, Keyhole, and Alignment. Alignment adds a crosshair, 2× zoom, and a continuous laser for precise targeting — and Helios remembers your choice.
  • Instant power-on cue. The aiming laser lights the moment Helios starts up, so you get a clear “it’s on” signal the instant you power on.
  • Richer measurement records. Every reading now saves a clean summary in a single Records.csv file on the SD card, along with five key images — first, last, hottest, coldest, and average — so your data is easy to review on a PC.
  • Organize records on the device. Browse and filter your saved measurements by location, select several at once to remove, and find untagged readings grouped together so nothing gets lost.
  • On-device settings. Adjust screen brightness with a live preview, set screen-off and power-off timers (including “never”), and set the date and time — all from the device.
  • Changes take effect when you save. Settings now apply only when you press Save, so a stray tap can’t alter your setup.
  • Long measurements save themselves. A held reading now stops and saves automatically after three minutes, so a forgotten trigger won’t fill your storage.

Version 0.10.11

Detailed release notes start with the next release.

The data on this site are based on current knowledge and experience and do not relieve users from carrying out their own investigations and tests, nor imply any guarantee of certain properties or suitability for a specific purpose. Specifications may change without prior notice. EXACTUS® is a registered trademark of BASF. © 2025–2026 BASF.